Glass glue (silicone sealant)

Chemical properties of products:

Glass glue is a one component RTV silicone sealant, the main ingredient is silicone, small amount of auxiliary materials. Silicone rubber as the main raw material, adding reinforcing agent, crosslinking agent, antioxidant, accelerator, increasing one component room temperature curing type sealant plastic agent synthesized by advanced technology, good aging resistance.

Product characteristics:

High temperature resistant glass glue, one component silicone products, the use of low temperature -60 degrees Celsius range: high temperature to +280 degrees for most materials have better adhesion strength and sealing performance. Excellent electrical insulation performance, with moisture-proof, anti corona, shock absorber and many other characteristics. Outdoor aging performance is excellent, the service life of up to 20 ~ 30 years; no yellowing, no oil permeability comprehensive performance is excellent.

technical parameter

Type: 710 acid

Content: 45-60%

Color: white, black, transparent, gray, bronze, blue

Main use:

In glass, ceramics, aluminum alloy, non oily Wood and other general building materials in the sealing of the widely used, and can be used for waterproof bonding, but can not be used for structural glass assembly and packaging.

Instructions:

First of all, clean the surface of the substrate moisture, grease, dust, etc., if necessary, can be used as cleaning solvents such as xylene, methyl ethyl ketone, clean the surface and then use a clean cloth to wipe away all the residues, so that the substrate clean, dry. In order to ensure the sealing work perfectly aligned lines near the surface of the tape interface cover, cut with a knife mounted on the hose mouth, nose tube, then in the 45 degree angle cut according to the size of filling.

Second, ballast glue gun at a 45 degree angle along the gap pressure of the rubber glue, to ensure close contact with the substrate surface; when the joint width greater than 15 mm, required repeatedly coating, coating tools for finishing the surface, remove excess glue and tape torn off, if stains can be used wet cloth to remove; glass glue in curing the surface for 10 minutes at room temperature, fully vulcanized is required for 24 hours or longer, according to the coating thickness and ambient temperature and humidity varies according to the specific situation.

Packing

Storage requirements:

Store in a cool dry place